Installation method for steel fire-rated doors

Dec 11, 2025

Eine Nachricht hinterlassen

Steel and wooden fire doors have some detailed differences in their installation methods. There are also slight differences in their fire resistance ratings. It is crucial to pay attention to these details during installation.

 

Firstly, when installing wooden fire doors, the door frame size should be 20mm smaller than the opening, and the bottom of the door frame should be embedded 20mm into the ground. The door frame should be securely fixed to the wall, ensuring vertical alignment and right angles. During installation, pay close attention to ensuring the frame is straight and at right angles, avoiding any planing or sawing. There should be at least three fixing points on each side of the door frame, with a spacing of preferably no more than 800mm.

 

Secondly, when installing steel fire doors, to prevent bending and deformation of the door frame, the frame should be supported with wooden planks in the width direction. The bottom of the door frame should be embedded 20mm into the ground, and then the door frame should be welded to the pre-embedded parts in the wall. Then, a hole is made in the wall at the upper corner of the door frame, and concrete made of cement, sand, and expanded perlite (1:2:5 ratio) is poured in. The door can be used after the concrete has solidified.

Anfrage senden
Holen Sie sich ein Angebot für Ihre Türen
Kontaktieren Sie uns